END OF FINISHED RUN INSTALLATION

 

LevelEase clips can be used as temporary spacers on the top of each cabinet to maintain the spacing between cabinets before attaching cabinets to the wall.  Just install the LevelEase clips “upside down” between cabinets.  Be sure to remove any LevelEase clips installed on top before completion of your installation.

SPECIAL APPLICATIONS

LevelEase clips can be installed on cabinets next to a dishwasher, range, stove or other appliances without interfering with the appliance.  Before attaching the LevelEase clip to the cabinets’ side facing the appliance, remove the “oversized channel” of each clip facing the appliance and attach  the clips to the cabinet as usual.

The “oversized channel” can be removed by first scoring the clip channel at the breaking point with a pair of diagonal pliers and then bending the channel until it breaks off. 

End-of-Run LevelEase clips  are supplied without the vertical flange on the friction-fit channel and have two holes for attachment to the sidewall of the cabinet on the finished end.  Drill two access holes (front and back) into the floor of the cabinet on the finished end side of the cabinet.  Attach the LevelEase clips—oversized-channel facing in—directly over access holes.   Flip and place cabinet  and adjust the LevelEase clips through the floor of the cabinet.  Finish by capping holes with plastic insert.

INSTALLATION NEXT TO AN APPLIANCE