STEP 1

Install LevelEase clips on all 4 corners of the first cabinet.  Attach the Friction-Fit Channel of each clip to the sidewall of the cabinet as shown by gently tapping into place.

 

STEP 2

Position cabinet against wall and level all 4 clips using the LevelEase short-handled hex tool until cabinet is level and plumb and attach cabinet to wall.

 

STEP 3

Attach 2 clips to one side of the next base cabinet and place cabinet into position by lowering the side of the cabinet into the LevelEase clips attached to the cabinet that has already been leveled .  Level the newly placed cabinet using the short-handled hex tool.  Screw both cabinets together through their face-frames  Continue adding cabinets to complete your installation.

 

How to install base cabinets with LevelEase cabinet leveling clips.

Patent-Pending Dual-Channel design levels two cabinets at once.

Adjustments can be made to each LevelEase clip after installation of adjacent cabinets. The LevelEase long-handled tool allows access to the LevelEase clips at all times even when they’re installed between cabinets.  Just place the long-handled tool between two cabinets and insert the head of the tool into the top of the leveling screw in the LevelEase clip and adjust as needed.